Skip to main content

The centrifugal fan adopts a single suction D drive structure, and the fan and the motor are connected through a coupling. The main body of the centrifugal fan consists mainly of a casing, an air inlet, a rotor group (impeller and the main shaft) , a bearing casing and a coupling. The F gearbox has two bearing blocks, two bearing blocks, one single air intake chamber and two double air intake chambers. The C and B gearboxes have drive wheels and driven wheels.
In addition to centrifugal fan, centrifugal fan can also be configured according to customer needs a variety of external accessories. Common are: motor, regulating door, integral bracket, electric actuator, Silencer, etc. .
A centrifugal fan is called a “Clockwise” fan if the impeller rotates clockwise from the motor end, a anticlockwise direction fan, or an “Undo” fan.
The outlet angle of centrifugal fan shell indicates the outlet position: “Forward” and“Reverse” can be divided into six angles: 0: ° , 45 ° , 90 ° , 135 ° , 180 ° and 225 ° . Other special angle may also carry on according to the customer request.
Depending on the situation, the housing has the following two:
(1) water-cooled housing
(2) oil-cooled housing

Titanium alloy centrifugal blower

Titanium alloy centrifugal blower

High temperature centrifugal blower

High temperature centrifugal blower

Zero leakage centrifugal blower

Zero leakage centrifugal blower

High pressure centrifugal blower

High pressure centrifugal blower

Double outlet centrifugal blower

Double outlet centrifugal blower

Combustion-supporting centrifugal fan

Combustion-supporting centrifugal fan