Industry News

When choosing a suitable industrial fan in the metallurgical industry, the following aspects need to be considered in detail: Process requirements: clarify the specific requirements for gas delivery, pressure regulation, etc. in the metallurgical process to ensure that the fan can meet the needs of the process. Air volume and…

Common faults and solutions for medium-pressure insulation fans include but are not limited to the following: Excessive fan vibration: This may be caused by unbalanced rotors, loose foundations, too small adjustment valves, etc. Solutions include cleaning up dust accumulation, re-balancing, tightening anchor bolts, adjusting valve opening, etc. Insufficient air volume…

The working principle of the high-temperature plug-in centrifugal fan is as follows: Impeller rotation: The motor drives the impeller to rotate. Gas suction: When the impeller rotates, the gas is sucked into the fan under the action of the blades. Energy conversion: The impeller converts the mechanical energy of the…

The wind pressure and air volume of the centrifugal fan of the washing table have the following effects on the washing effect: Air volume: Cleaning efficiency: Sufficient air volume can ensure sufficient air flow in the washing table, accelerate the evaporation of water vapor, and improve cleaning efficiency. Uniform distribution:…

The difference between backward-inclined direct-connected centrifugal fans and other types of centrifugal fans is mainly reflected in the following aspects: output power: in order to overcome the system resistance of the static pressure head, generally the forward-leaning centrifugal fan is smaller than the backward-leaning centrifugal fan, and because the middle…

Axial-flow fan is a common ventilation equipment, its working principle is to drive the blade rotation through the rotating shaft, thus producing airflow. Axial flow fan is usually used for ventilation, ventilation, heat dissipation and other occasions, such as air conditioning systems, ventilation systems, electronic equipment, heat dissipation and so…

The noise level of high-temperature insert centrifugal fan is affected by many factors, such as fan design, manufacturing quality, running speed, load, installation mode and so on. Generally speaking, the high-temperature insert centrifugal fan with good quality will not make a lot of noise in normal operation, but it may…

The centrifugal fan is a kind of high-efficiency ventilation equipment specially designed for the equipment such as washing table, which plays a vital role in the environment of Industry, medical treatment and laboratory. The following are some of the features and advantages of the centrifugal fan for the washing table…

Medium-voltage heat preservation fan is a common ventilation equipment in industrial production, with the following advantages: long service life: the components of the medium-pressure heat-insulating fan are precisely processed and uniquely designed, with a longer service life and a longer service life, reducing the maintenance cost of the equipment. high…

It is commonly used where large amounts of air flow are required, such as: Ventilation system: in buildings, factories, warehouses and other places, axial flow fan can provide effective ventilation, keep the air fresh. Air conditioning system: axial flow fan is often used in air conditioning equipment to help circulate…

The centrifugal fan is a kind of ventilation equipment, which is mainly used for the ventilation and exhaust of the washing table. It produces the negative pressure through the high-speed rotating impeller, draws in the air and discharges it through the ventilation pipe, thus achieving the goal of ventilation and…

The centrifugal fan is a kind of ventilating and ventilating device used for washing table or similar equipment. Its main functions include: 1. Ventilation: centrifugal fan through the rotating impeller to generate airflow, air into or out of the area of the washing table to maintain good ventilation environment. 2.…